Limited reprint second edition FLYER'S backpack nylon twill (bonding processing) HJH-4020_R
HARVEST LABEL
Limited reprint FLYER'S
* It ended at the end of June.
Backpack
- Item No .: HJH-4020_R
- Inspired by the US Air Force-supplied flight jacket "MA-1", the "FLYER'S" series, which uses high-density nylon twill that was originally developed, is resistant to tearing and tearing, and has a soft feel of cotton-bonded material. It is one of the attractions.
- The backpack with a simple yet baptized design uses a storm flap (wind shield) inside the main body fastener like the MA-1, which also helps prevent water ingress and theft due to rain.
- The main storage is compatible with A4 files, and the zipper extends to the bottom, so you can see it firmly to the bottom and it has excellent visibility.
- Belts are placed on both sides of the main body in two places, upper and lower, and the gusset size can be adjusted according to the increase or decrease of luggage.
- Made in Japan
Product Details
- Size W370 x H 440 x D180
- Material Nylon twill (bonding) x cowhide x metal fastener parts
- Weight 960g
-
Pocket Sleeve (outside) x2, open pocket (inside) x1
This item is available for pre-order only on the official website.
The schedule of delivery time is described below.
Customers whose reservations have been confirmed by the start of reservations to May 5th ... Mid-August to late August.
Customers whose reservations have been confirmed between May 5th and the end of June ... After the end of September
Reservation deadline ... End of June 2020
Scheduled delivery ... Around September 2020
Payment method: Bank transfer, credit card, Rakuten Pay, Amazon Pay (Cash on delivery is not available)
* Notes on payment *
Since this product is made to order, the products will be shipped sequentially from August, but payment will be made in advance.
・ If you pay by credit card, Rakuten Pay, or Amazon Pay, the payment will be made at the time of ordering.
・ Customers who make a bank transfer will receive an email to inform them of the transfer when placing an order, and will confirm the order after confirming payment.
If payment is not confirmed within 2 weeks after booking, we will notify you by email of cancellation notice.
Please note the above before ordering.
Under the supervision of the craftsmen who were involved at that time at our own garment factory in Japan
In order to maintain the pride and quality of being made in Japan, we will carefully make each one.
Therefore, it takes a few days to finish.Please understand that we will ship the finished products in order.
Made in Japan
HARVEST LABEL
Limited reprint FLYER'S
* It ended at the end of June.
Backpack
- Item No .: HJH-4020_R
- Inspired by the US Air Force-supplied flight jacket "MA-1", the "FLYER'S" series, which uses high-density nylon twill that was originally developed, is resistant to tearing and tearing, and has a soft feel of cotton-bonded material. It is one of the attractions.
- The backpack with a simple yet baptized design uses a storm flap (wind shield) inside the main body fastener like the MA-1, which also helps prevent water ingress and theft due to rain.
- The main storage is compatible with A4 files, and the zipper extends to the bottom, so you can see it firmly to the bottom and it has excellent visibility.
- Belts are placed on both sides of the main body in two places, upper and lower, and the gusset size can be adjusted according to the increase or decrease of luggage.
- Made in Japan
Product Details
- Size W370 x H 440 x D180
- Material Nylon twill (bonding) x cowhide x metal fastener parts
- Weight 960g
-
Pocket Sleeve (outside) x2, open pocket (inside) x1
This item is available for pre-order only on the official website.
The schedule of delivery time is described below.
Customers whose reservations have been confirmed by the start of reservations to May 5th ... Mid-August to late August.
Customers whose reservations have been confirmed between May 5th and the end of June ... After the end of September
Reservation deadline ... End of June 2020
Scheduled delivery ... Around September 2020
Payment method: Bank transfer, credit card, Rakuten Pay, Amazon Pay (Cash on delivery is not available)
* Notes on payment *
Since this product is made to order, the products will be shipped sequentially from August, but payment will be made in advance.
・ If you pay by credit card, Rakuten Pay, or Amazon Pay, the payment will be made at the time of ordering.
・ Customers who make a bank transfer will receive an email to inform them of the transfer when placing an order, and will confirm the order after confirming payment.
If payment is not confirmed within 2 weeks after booking, we will notify you by email of cancellation notice.
Please note the above before ordering.
Under the supervision of the craftsmen who were involved at that time at our own garment factory in Japan
In order to maintain the pride and quality of being made in Japan, we will carefully make each one.
Therefore, it takes a few days to finish.Please understand that we will ship the finished products in order.
Made in Japan
Limited reprint second edition FLYER'S backpack nylon twill (bonding processing) HJH-4020_R
HARVEST LABEL
Limited reprint FLYER'S
* It ended at the end of June.
Backpack
- Item No .: HJH-4020_R
- Inspired by the US Air Force-supplied flight jacket "MA-1", the "FLYER'S" series, which uses high-density nylon twill that was originally developed, is resistant to tearing and tearing, and has a soft feel of cotton-bonded material. It is one of the attractions.
- The backpack with a simple yet baptized design uses a storm flap (wind shield) inside the main body fastener like the MA-1, which also helps prevent water ingress and theft due to rain.
- The main storage is compatible with A4 files, and the zipper extends to the bottom, so you can see it firmly to the bottom and it has excellent visibility.
- Belts are placed on both sides of the main body in two places, upper and lower, and the gusset size can be adjusted according to the increase or decrease of luggage.
- Made in Japan
Product Details
- Size W370 x H 440 x D180
- Material Nylon twill (bonding) x cowhide x metal fastener parts
- Weight 960g
-
Pocket Sleeve (outside) x2, open pocket (inside) x1
This item is available for pre-order only on the official website.
The schedule of delivery time is described below.
Customers whose reservations have been confirmed by the start of reservations to May 5th ... Mid-August to late August.
Customers whose reservations have been confirmed between May 5th and the end of June ... After the end of September
Reservation deadline ... End of June 2020
Scheduled delivery ... Around September 2020
Payment method: Bank transfer, credit card, Rakuten Pay, Amazon Pay (Cash on delivery is not available)
* Notes on payment *
Since this product is made to order, the products will be shipped sequentially from August, but payment will be made in advance.
・ If you pay by credit card, Rakuten Pay, or Amazon Pay, the payment will be made at the time of ordering.
・ Customers who make a bank transfer will receive an email to inform them of the transfer when placing an order, and will confirm the order after confirming payment.
If payment is not confirmed within 2 weeks after booking, we will notify you by email of cancellation notice.
Please note the above before ordering.
Under the supervision of the craftsmen who were involved at that time at our own garment factory in Japan
In order to maintain the pride and quality of being made in Japan, we will carefully make each one.
Therefore, it takes a few days to finish.Please understand that we will ship the finished products in order.
Made in Japan
HARVEST LABEL
Limited reprint FLYER'S
* It ended at the end of June.
Backpack
- Item No .: HJH-4020_R
- Inspired by the US Air Force-supplied flight jacket "MA-1", the "FLYER'S" series, which uses high-density nylon twill that was originally developed, is resistant to tearing and tearing, and has a soft feel of cotton-bonded material. It is one of the attractions.
- The backpack with a simple yet baptized design uses a storm flap (wind shield) inside the main body fastener like the MA-1, which also helps prevent water ingress and theft due to rain.
- The main storage is compatible with A4 files, and the zipper extends to the bottom, so you can see it firmly to the bottom and it has excellent visibility.
- Belts are placed on both sides of the main body in two places, upper and lower, and the gusset size can be adjusted according to the increase or decrease of luggage.
- Made in Japan
Product Details
- Size W370 x H 440 x D180
- Material Nylon twill (bonding) x cowhide x metal fastener parts
- Weight 960g
-
Pocket Sleeve (outside) x2, open pocket (inside) x1
This item is available for pre-order only on the official website.
The schedule of delivery time is described below.
Customers whose reservations have been confirmed by the start of reservations to May 5th ... Mid-August to late August.
Customers whose reservations have been confirmed between May 5th and the end of June ... After the end of September
Reservation deadline ... End of June 2020
Scheduled delivery ... Around September 2020
Payment method: Bank transfer, credit card, Rakuten Pay, Amazon Pay (Cash on delivery is not available)
* Notes on payment *
Since this product is made to order, the products will be shipped sequentially from August, but payment will be made in advance.
・ If you pay by credit card, Rakuten Pay, or Amazon Pay, the payment will be made at the time of ordering.
・ Customers who make a bank transfer will receive an email to inform them of the transfer when placing an order, and will confirm the order after confirming payment.
If payment is not confirmed within 2 weeks after booking, we will notify you by email of cancellation notice.
Please note the above before ordering.
Under the supervision of the craftsmen who were involved at that time at our own garment factory in Japan
In order to maintain the pride and quality of being made in Japan, we will carefully make each one.
Therefore, it takes a few days to finish.Please understand that we will ship the finished products in order.
Made in Japan